XX-Tuning and Dyno - Superchips Custom Tuning in Connecticut, Massuchusets, New York SCT Custom Dyno tuning by the best in Connecticut

XX Tuning can custom tune your car according to your modifications. Our custom SCT Tuning will not only give you more power, but it will take the place of multiple products. The tune will be custom calibrated to your vehicle modifications, no canned tuning here! No need for a timing adjuster, MIL eliminators, speedcal (when changing rear end gears). This can all be taken care of in the tune. XX uses the new Advantage 3.0 tuning software from Superchips Custom Tuning. Your custom tune is created by a tuner with over 7 years of tuning experience, is both SCT and EFI Certified, and has a proven track record in the Ford and domestic community.

SCT Custom Chip, 4 Bank, EEC IV or V - *NO DYNO*

1987 - 2004 Vehicles only!

Pre-Configured program with minor mods

$350

Reburn, Pre Configured Program

$25

SCT 4 Program, 4 Bank Chip, EEC IV or V - *No Dyno*

1987 - 2004 Vehicles only!

Up to 3 Pre-Configured program with minor mods

$395

Reburn Pre Configured Program (per program)

$25

Data cable, selector Switch, and switch mount combo

$65

SCT 4 Program Xcalibrator EEC IV - *No Dyno*

1996 - 2006 Vehicles only!

Up to 3 Pre-Configured program with minor mods

$475

Re-Program Xcalibrator 2

$25

SCT Gas Custom 4 Bank Chip with Custom tuning.

1 Custom Tune Plus Stock Program (Includes Dyno time)

$750

Reburn Custom Tune

$20

SCT Gas Custom Xcalibrator "2" with Custom tuning.

1 Custom Tune Plus Stock Program (Includes Dyno time)

$800

SCT Custom Diesel 7.3L or 6.0L - No Dyno needed

Xcal 2 with 3 tunes - Tow, Max Power, Economy (+stock)

$550

4 bank Chip with 3 tunes - Tow, Max Power, Economy (+stock)

$500

(Typical gains on Max power are 120rwhp, 200rwtq)

Other SCT Products

SCT Xcalibrator "2" - No Tune

$400

SCT 4 Bank chip - No Tune

$289

SCT Data Cable and Selector Switch

$55

SCT/XX Tuning Selector Switch mount (94-04)

$30

SCT MASS AIR METERS BA-2400 (650rwhp)

$275

SCT MASS AIR METERS BA-2800 (850rwhp)

$285

SCT CNC Big Air Adapter

$49

Labor Rates

Install bung for wideband O2sensor

$75

Remove computer, clean contacts, install chip

$75

Code Scan / Diagnosis

$30

Data logging and custom tuning current SCT customers

$150/hr.

Package pricing available, please email us for more information

The XCalibrator 2 also allows 2 analog inputs when data logging (such as Wideband O2s). Also, because everyone should know what those Check engine lights mean, the XCalibrator 2 allows you to read and understand these codes the minute they appear so you can get back to enjoying your favorite vehicle.

TUNE your own vehicle
FOR MAXIMUM BOLT-ON
PERFORMANCE!

MONITOR & Adjust
your vehicles DATA &
PERFORMANCE!

Datalog Hundreds of
your vehicles EEC
parameters

The XCalibrator 2 arrives
Pre-Loaded with 2 SCT
Calibrations

Complete User Adjustability:

Fuel Adjustment	Axle Ratio Selection	Other Selections
Wide Open Throttle: 6% Leaner to 14% Richer	2.73 to 5.14 Ratios	Idle RPM: -300 to +300RPM Cooling Fan: On / Off Temp Traction Control: On / Off Two Step: On / Off & RPM
Wide Open Throttle: 6% Leaner to 14% Richer	MAF Selection
Spark Adjustment	80mm to 90mm Lightning SCT Big Air BA-2400 & BA-2800 MAF Meters
Global Spark: -5 to +5 degrees RPM Adjustment Spark: 0 - 2000RPM: -14 to +4 degrees 2000 - 4000RPM: -8 to +4 degrees 4000 - 8000RPM: -8 to +4 degrees	Tire Size Selection	Shift Adjustment
	205/65/15 to 315/35/19	Automatic Transmission Shift Schedule: WOT 1st - 2nd: -3 to +7mph WOT 2nd - 3rd: -4 to +8mph WOT 3rd - 4th: -5 to +10mph WOT 4th - 5th: -5 to +10mph
	Fuel Injector Selection
	19lb to 60lb Fuel Injectors